MSP sensors 8-15-20-30-40-60-80-100 kg
The MSP platform type load cell can measure weight from a single point. It provides a high level of accuracy and is equipped with internal thermal compensation, which corrects the drift of the output signal due to fluctuations in the ambient temperature.
The stainless steel MSP load cell has been developed for use in platform scales for weighing small loads in the food, chemical and pharmaceutical industries. Suitable for platforms up to 40 x 40 cm in size. The sensor can be installed in the center or under the platform.
Features:
- Easy to mount
- Stainless Steel
- IP67 industrial protection
- Certified according to OIML R60 standards
| Type | Nominal load | Minimum load | Maximum overload |
| MSP 8 | 8 kg | 0.4 g | 0.26 kg |
| MSP 15 | 15 kg | 0.75 g | 0.26 kg |
| MSP 20 | 20 kg | 1 g | 0.26 kg |
| MSP 40 | 40 kg | 2 g | 0.26 kg |
| MSP 60* | 60 kg | 3 g | 0.26 kg |
| MSP 80* | 80 kg | 4 g | 0.26 kg |
| MSP 100* | 100 kg | 5 g | 0.26 kg |
| Nominal load (Emax) | kg | 8, 15, 20, 30, 40, 60, 80, 100 |
| Accuracy class (OIML R60) | C3 | |
| Discreteness by class (nLC) | 3000 | |
| Minimum weighing interval (Vmin) | 0.005 %Emax | |
| General error | % | ≤ ±0.033 |
| Error of return to zero (DR) | %Emax | 0.0061 |
| Minimum load | %Emax | 0 |
| Maximum overload | %Emax | 150 |
| Permissible horizontal overload | %Emax | 100 |
| Destructive overload | %Emax | 200 |
| Deformation (at Emax) | mm | ≤0.3 |
| Maximum excitation voltage (Umax) | IN | 15 |
| RCP (Cn) | mV/V | 2 ±10% |
| Zero balance | % Cn | ≤ ±1.0 |
| Input impedance | Ω | 380 ±20 |
| Output resistance | Ω | 351 ±3 |
| Insulation resistance | MΩ | ≥500 |
| Compensated operating range | °C | -0…+40 |
| Operating temperature range | °C | -40…+80 |
| Sensor material | Stainless Steel | |
| Protection class (according to EN60529 classification) | IP67 | |
| Cable length | m | 3 |
| Cable diameter | mm | 5 |
| Mass | kg | 0.26 |
| Package weight and dimensions | cm/kg | 17.5x9x5 / 0.3 |
Reviews
There are no reviews yet.